Identity
- Type
- Solenoid
- Maker printed on the part
- Albright International
- Maker part number
- SW201
Motor and performance
- Fault breaking capacity at 5 ms, no blowouts
- 1500A at 48V D.C.
- Intermittent current at 30% duty (interrupted)
- 455A interrupted at 30% duty
- Intermittent current at 30% duty (uninterrupted)
455A uninterrupted at 30% duty
“30% Duty 455A 455A”
Source: albrightinternational.com/products/sw201
730A uninterrupted at 30% duty
“30% Duty 455A 730A”
Source: albrightinternational.com/wpcms/wp-content/uploads/2020/06/SW201-Data-Sheet.pdf
- Intermittent current at 40% duty (interrupted)
- 395A interrupted at 40% duty
- Intermittent current at 40% duty (uninterrupted)
395A uninterrupted at 40% duty
“40% Duty 395A 395A”
Source: albrightinternational.com/products/sw201
630A uninterrupted at 40% duty
“40% Duty 395A 630A”
Source: albrightinternational.com/wpcms/wp-content/uploads/2020/06/SW201-Data-Sheet.pdf
- Intermittent current at 50% duty (interrupted)
- 355A interrupted at 50% duty
- Intermittent current at 50% duty (uninterrupted)
355A uninterrupted at 50% duty
“50% Duty 355A 355A”
Source: albrightinternational.com/products/sw201
565A uninterrupted at 50% duty
“50% Duty 355A 565A”
Source: albrightinternational.com/wpcms/wp-content/uploads/2020/06/SW201-Data-Sheet.pdf
- Intermittent current at 60% duty (interrupted)
- 325A interrupted at 60% duty
- Intermittent current at 60% duty (uninterrupted)
325A uninterrupted at 60% duty
“60% Duty 325A 325A”
Source: albrightinternational.com/products/sw201
515A uninterrupted at 60% duty
“60% Duty 325A 515A”
Source: albrightinternational.com/wpcms/wp-content/uploads/2020/06/SW201-Data-Sheet.pdf
- Intermittent current at 70% duty (interrupted)
- 300A interrupted at 70% duty
- Intermittent current at 70% duty (uninterrupted)
300A uninterrupted at 70% duty
“70% Duty 300A 300A”
Source: albrightinternational.com/products/sw201
480A uninterrupted at 70% duty
“70% Duty 300A 480A”
Source: albrightinternational.com/wpcms/wp-content/uploads/2020/06/SW201-Data-Sheet.pdf
- Auxiliary contact switching at 24 volts
- 5A at 24V D.C. (column not attributed)
- Auxiliary contact switching at 48 volts
- 2A at 48V D.C. (column not attributed)
- Auxiliary contact switching at 240 volts
- 0.5A at 240V D.C. (column not attributed)
- Fault breaking capacity at 5 ms, with blowouts
- 1500A at 96V D.C.
“(In accordance with UL583*) Blowouts 1500A at 96V D.C. No Blowouts 1500A at 48V D.C.”
Source: albrightinternational.com/products/sw201
“30% Duty 455A 455A”
Source: albrightinternational.com/products/sw201
“40% Duty 395A 395A”
Source: albrightinternational.com/products/sw201
“50% Duty 355A 355A”
Source: albrightinternational.com/products/sw201
“60% Duty 325A 325A”
Source: albrightinternational.com/products/sw201
“70% Duty 300A 300A”
Source: albrightinternational.com/products/sw201
“5A at 24V D.C.”
Source: albrightinternational.com/wpcms/wp-content/uploads/2020/06/SW201-Data-Sheet.pdf
“2A at 48V D.C.”
Source: albrightinternational.com/wpcms/wp-content/uploads/2020/06/SW201-Data-Sheet.pdf
“0.5A at 240V D.C.”
Source: albrightinternational.com/wpcms/wp-content/uploads/2020/06/SW201-Data-Sheet.pdf
“(In accordance with UL583*) Blowouts 1500A at 96V D.C. No Blowouts 1500A at 48V D.C.”
Source: albrightinternational.com/products/sw201
Compatibility
- What the maker says it is for
- direct current loads, including motors as used on electric vehicles such as industrial trucks
“The SW201 has been designed for direct current loads, including motors as used on electric vehicles such as industrial trucks.”
Source: albrightinternational.com/products/sw201
Frame and components
- Part type
- D.C. contactor
“SW201 D.C. contactor - Albright”
Source: albrightinternational.com/products/sw201
Identity
- Manufacturer of record
- Albright
- Model code
- SW201
“SW201 D.C. contactor - Albright”
Source: albrightinternational.com/products/sw201
“SW201 D.C. contactor - Albright”
Source: albrightinternational.com/products/sw201
Other findings
- Advised busbar size
- 260mm2
- Auxiliary thermal current rating
- 5A
- Coil connections
- 6.3mm spade coil connections
- Coil power dissipation continuously
- 13 - 21 Watts
- Coil power dissipation highly
- 60 - 80 Watts
- Coil power dissipation intermittently
- 30 - 60 Watts
- Coil power dissipation prolonged
- 21 - 30 Watts
- Coil voltage range
- 6 - 240V (rectifier board required for A.C.)
- Contact arrangement
- single pole double throw, double breaking main contacts with silver alloy tips
- Drop out voltage range
- 10 - 20% Us
- Guideline weight
- 1600 gms
- Guideline weight with auxiliary
- + 20 gms
- Guideline weight without blowouts
- - 50 gms
- Main contact changeover closed to open
- 14ms
- Main contact changeover open to closed
- 8ms
- Main terminals
- M10 stud main terminals
- Max contact voltage no blowouts interrupted
- 48V
- Max contact voltage with blowouts interrupted
- 96V
- Max pull in voltage continuously
- 66% Us
- Max pull in voltage highly
- 60% Us
- Max pull in voltage intermittently
- 60% Us
- Max pull in voltage prolonged
- 60% Us
- Mechanical durability
- > 5,000,000 Cycles
- Mounting orientation
- horizontal or vertical, when vertical the M10 contact studs should point upwards
- Mounting tapped holes
M5 tapped holes or mounting brackets
SW201 D.C. contactor - Albright · retrieved 2 October 2026
“It can be mounted via M5 tapped holes or mounting brackets”
Source: albrightinternational.com/products/sw201
M4 tapped holes
SW201-Data-Sheet.pdf · retrieved 2 October 2026
“It can be mounted via M4 tapped holes or mounting brackets”
Source: albrightinternational.com/wpcms/wp-content/uploads/2020/06/SW201-Data-Sheet.pdf
- Normally closed limitation
- Normally Closed contacts are not suited to make and break load
- Operating ambient temperature
- - 40˚C to + 60˚C
- Thermal current rating interrupted
- 250A interrupted
- Thermal current rating uninterrupted
250A uninterrupted
SW201 D.C. contactor - Albright · retrieved 2 October 2026
“Thermal Current Rating 250A 250A”
Source: albrightinternational.com/products/sw201
400A uninterrupted
SW201-Data-Sheet.pdf · retrieved 2 October 2026
“Thermal Current Rating (I th) 250A 400A”
Source: albrightinternational.com/wpcms/wp-content/uploads/2020/06/SW201-Data-Sheet.pdf
- Typical contact bounce period
- 3ms
- Typical drop out time with diode
- 100ms
- Typical drop out time with diode and resistor
- 30ms
- Typical drop out time without suppression
- 10ms
- Typical pull in time
- 40ms
- Uninterrupted rating footnote
- Normally Open contacts only - Normally Closed should be rated as per
- Voltage drop per pole
- 40mV at 250A
“Copper busbar 260mm2 [0.40inch2]”
Source: albrightinternational.com/wpcms/wp-content/uploads/2020/06/SW201-Data-Sheet.pdf
“Auxiliary Thermal Current Rating 5A”
Source: albrightinternational.com/wpcms/wp-content/uploads/2020/06/SW201-Data-Sheet.pdf
“The SW201 has M10 stud main terminals and 6.3mm spade coil connections.”
Source: albrightinternational.com/products/sw201
“Continuously Rated Types 13 - 21 Watts”
Source: albrightinternational.com/wpcms/wp-content/uploads/2020/06/SW201-Data-Sheet.pdf
“Highly Intermittent Rated Types 60 - 80 Watts”
Source: albrightinternational.com/wpcms/wp-content/uploads/2020/06/SW201-Data-Sheet.pdf
“Intermittently Rated types 30 - 60 Watts”
Source: albrightinternational.com/wpcms/wp-content/uploads/2020/06/SW201-Data-Sheet.pdf
“Prolonged Rated Types 21 - 30 Watts”
Source: albrightinternational.com/wpcms/wp-content/uploads/2020/06/SW201-Data-Sheet.pdf
“Coil Voltage Available (Us) (Rectifier board required for A.C.) 6 - 240V”
Source: albrightinternational.com/products/sw201
“The SW201 features single pole double throw, double breaking main contacts with silver alloy tips”
Source: albrightinternational.com/products/sw201
“Drop-Out Voltage Range 10 - 20% Us”
Source: albrightinternational.com/wpcms/wp-content/uploads/2020/06/SW201-Data-Sheet.pdf
“SW201 1600 gms”
Source: albrightinternational.com/wpcms/wp-content/uploads/2020/06/SW201-Data-Sheet.pdf
“With Auxiliary + 20 gms”
Source: albrightinternational.com/wpcms/wp-content/uploads/2020/06/SW201-Data-Sheet.pdf
“Without Blowouts - 50 gms”
Source: albrightinternational.com/wpcms/wp-content/uploads/2020/06/SW201-Data-Sheet.pdf
“Normally Closed to Normally Open 14ms”
Source: albrightinternational.com/wpcms/wp-content/uploads/2020/06/SW201-Data-Sheet.pdf
“Normally Open to Normally Closed 8ms”
Source: albrightinternational.com/wpcms/wp-content/uploads/2020/06/SW201-Data-Sheet.pdf
“The SW201 has M10 stud main terminals and 6.3mm spade coil connections.”
Source: albrightinternational.com/products/sw201
“Maximum Recommended Contact Voltages Blowouts 96V - No Blowouts 48V -”
Source: albrightinternational.com/products/sw201
“Maximum Recommended Contact Voltages Blowouts 96V - No Blowouts 48V -”
Source: albrightinternational.com/products/sw201
“Continuously Rated Types 66% Us (100% Duty Cycle)”
Source: albrightinternational.com/wpcms/wp-content/uploads/2020/06/SW201-Data-Sheet.pdf
“Highly Intermittent Rated types 60% Us (Max 25% Duty Cycle)”
Source: albrightinternational.com/wpcms/wp-content/uploads/2020/06/SW201-Data-Sheet.pdf
“Intermittently Rated types 60% Us (Max 70% Duty Cycle)”
Source: albrightinternational.com/wpcms/wp-content/uploads/2020/06/SW201-Data-Sheet.pdf
“Prolonged Operation 60% Us (Max 90% Duty Cycle)”
Source: albrightinternational.com/wpcms/wp-content/uploads/2020/06/SW201-Data-Sheet.pdf
“Mechanical Durability > 5,000,000 Cycles”
Source: albrightinternational.com/products/sw201
“Mounting can be horizontal or vertical, when vertical the M10 contact studs should point upwards.”
Source: albrightinternational.com/products/sw201
The maker’s own documents give different figures
“Please note Normally Closed contacts are not suited to make and break load.”
Source: albrightinternational.com/products/sw201
“Operating Ambient Temperature - 40˚C to + 60˚C”
Source: albrightinternational.com/wpcms/wp-content/uploads/2020/06/SW201-Data-Sheet.pdf
“Thermal Current Rating 250A 250A”
Source: albrightinternational.com/products/sw201
The maker’s own documents give different figures
“Typical Contact Bounce Period 3ms”
Source: albrightinternational.com/wpcms/wp-content/uploads/2020/06/SW201-Data-Sheet.pdf
“With Diode Suppression 100ms”
Source: albrightinternational.com/wpcms/wp-content/uploads/2020/06/SW201-Data-Sheet.pdf
“With Diode and Resistor 30ms (Subject to resistance value)”
Source: albrightinternational.com/wpcms/wp-content/uploads/2020/06/SW201-Data-Sheet.pdf
“Without Suppression 10ms”
Source: albrightinternational.com/wpcms/wp-content/uploads/2020/06/SW201-Data-Sheet.pdf
“Typical Pull-In Time 40ms (N/O Contacts to Close)”
Source: albrightinternational.com/wpcms/wp-content/uploads/2020/06/SW201-Data-Sheet.pdf
“Normally Open contacts only - Normally Closed should be rated as per Interrupted Current”
Source: albrightinternational.com/wpcms/wp-content/uploads/2020/06/SW201-Data-Sheet.pdf
“Typical Voltage Drop per pole across New Contacts at 250A 40mV”
Source: albrightinternational.com/products/sw201
Sources
- Archived document
Source: albrightinternational.com/wpcms/wp-content/uploads/2020/06/SW201-Data-Sheet.pdf
Retrieved October 2, 2026
- SW201 D.C. contactor - AlbrightArchived document
Source: albrightinternational.com/products/sw201
Retrieved October 2, 2026